Privacy Call Receptionist

Our Review (THIS PRODUCT HAS BEEN DISCONTINUED)

Replaced by: Caller ID Manager

The Receptionist is one of the models in the Privacy Call Series designed with the Small to medium sized business owner or busy family in mind.

We found that it's operation to be nearly identical to that of the Privacy Call ID Screener. Refer to Privacy Call ID Screener Review for more information.

In addition to the features offered on the Privacy Call ID Screener, the Receptionist also offers valuable features like 'Fax Detection' and 'Remote Control.' With 'Fax Detection,' a single line can be used to receive both voice and fax calls, without the unnecessary expense of a dedicated line. The 'Remote Control' feature allows owner to change any feature of the Receptionist from a remote location. We tested both features and found that fax calls are silently forwarded to the fax device without ringing the phone and the remote control feature was as easy to use as being on the premises with the device.

Since there are four available extensions on this model, we tested the 'Answer Transfer' function, as a business would use. We also like the fact that each of the four ports can be connected to any type of telephone device, including a modem, fax modem, or telephone extension. In each configuation, the Privacy Call Receptionist performed flawlessly.

Customer Testimonials

"(The Privacy Call) allows only callers I know to ring my phones. And if someone calls in who doesn't know our code they can press '1' to leave a message, otherwise, hangs-up on them. It's been a great relief to know we can answer the phone now without being harassed by telemarketers." Michael, Charlotte, NC

We would love to hear from you if you have used one of our products!

CLICK HERE to email us your product feedback.

Frequently Asked Questions (FAQ)

• How complicated is the installation process?
• How long does it take to install?
• Will it work without Caller ID?
• How long must a caller wait before they enter their code to ring through?
• Do I create my own messages?
• What connections are required?
• How does the Privacy Call eliminate computer-generated telemarketing calls?
• Is there a warranty on the Privacy Call?
  

How complicated is the installation process?

The unit plugs into a normal phone system using phone jacks. Simply take the phone jack which was plugged into your phone, and plug it into the Privacy Call. Then take the line that comes with the Privacy Call and connect it to your telephone. Plug in the Power Unit to the nearest electric outlet, and you are ready!

Back to top...


How long does it take to install?

Less than 5 minutes.

Back to top...

Will it work with Caller ID?

Yes. However, all callers will be treated as 'Anonymous' callers and must enter a private code to ring your phone. Also, the 'Do Not Disturb' feature gets it's time information from Caller ID and would not be available without Caller ID service.

Back to top...

How long must a caller wait before they enter their code to ring through?

Immediate access can be gained at any time during the message.

Back to top...

Do I create my own messages?

Yes. A 25 second message can be recorded in your own voice. Sample messages are provided, or create your own.

Back to top...

What connections are required?

The Privacy Call comes with a power cord and telephone cable, and that is all that is needed. The power cord plugs into your electrical outlet and the Privacy Call. The cable is used to connect your phone outlet to the Privacy Call.

Back to top...


How does the Privacy Call eliminate computer-generated telemarketing calls?

The computer dialer obviously will not hear the Privacy Call's recorded message. However, when a computer dialer hears a recorded-- rather than a human - voice, it will simply hang up. The computer will not know to remove your name from the list, but it will most likely do so after a number of unsuccessful attempts.

Back to top...

Is there a warranty on the Privacy Call?

Yes. The Privacy Call is warranted to be free from defects in material and workmanship for a period of 1 year.

Back to top...